HC200系列
发布时间:2024/01/03
一。产品介绍
本机床适用于高速钢及硬质合金车刀对不同材质的轴类、圆筒形、盘状等零件进行外圆、端面、切槽、切
断的车削加工。
This machine is applicable for machining the excircle and end surface,as well as performing the grooving and cutting operations on axle,cylindrical and disc parts with different materials with the help of high speed steel or hard alloy cutters.
注:(1) 本公司保留修改技术参数的权利。
样本如与技术协议有出入,以技术协议为准。
二。技术参数
型号 参数 | Model Parameters | HC200×L/20-D2 | HC200×L/32-D3 | HC200×L/40-D3 | HC200×L/50-D3 | HC200×L/63-D3 |
床身导轨形式 | Type of lathe bed guideway | 整体床身二导轨 Integrated two guideways on lathe bed | 整体床身三导轨 Integrated three guideways on lathe bed | 整体床身四导轨 Integrated fou guideways on lathe bed | 整体床身三导轨 Integrated three guideways on lathe bed | |
最大回转直径 (mm) 床身上 刀架上 | Max.swing diameter(mm) On lathe bed On tool post | φ2000 φ1600 | ||||
最大工件长度L (mm) | Max.workpiece length L(mm) | 6000~20000 | 8000~20000 | |||
最大工件重量 (t) | Max.workpiece weight(t) | 20 | 32 | 40 | 50 | 63 |
加工直径范围 (mm) | Range of machining diameter(mm) | 0~φ1600 | ||||
主轴锥孔尺寸 (mm) | Dimension of spindle taper hole (mm) | φ120 1.7 | 139.719 1:4 | φ139.719 1:4 | φ196.869 1:4 | φ196.869 1:4 |
花盘最大扭矩 (kN·m) | Max.faceplate torque(kN·m) | 36 | 80 | 80 | 56 | 125 |
单刀架切削力 (kN) | Cutting force of single tool post (kN) | 71 | 90 | 90 | 70 | 125 |
花盘直径 (mm) | Faceplate diameter (mm) | φ2000 | ||||
主轴转速级数及范围 级数 范围(r/min) | Steps and range of spindle rotational speed Range(r/min) | 直流无级 DC stepless 1~200 | 直流无级 DC stepless 0.8~160 | 直流无级 DC stepless 0.8~160 | 直流无级 DC stepless 0.625~125 | 直流无级 DC stepless 0.625~125 |
刀架进给 (mm/min) 纵向 横向 | Tool post feed range (mm/min) Longitudinal Transverse | 0.1~40 0.05~20 | 0.5~500 0.5~500 | 0.265~500 0.1325~250 | ||
刀架快速移动 (mm/min) 纵向 横向 | Tool post fast movement (mm/min) Longitudina Transverse | 3000 1500 | 5000 4000 | 3000 1500 | ||
主电机功率 (kw) | Power of mair motor (kW) | 55 | 75 | 125 | ||
加工螺纹范围 公 制 ( m m ) 英制(t/in) 模数(mm) | Range of machining thread Metric system(mm) British system (t/in) Module(mm) | 1~60 6~1/2 1~6 | 1~160 6~1/2 1~6 | 1~160 6~1/2 1~6 | ||
注:以上数据均为标准参数,也可根据用户要求,配置不同的特殊功能部件。 | ||||||
如:砂带磨装置、磨头装置、铣头装置、排屑器装置、喷雾冷却装置、镗内孔装置、数显装置、简易数控刀架等。 | ||||||
Note:the above data are for standard parameters,the different CNC system and special functional components shall be equipped according to the user requirements.For example,abrasive belt grinding device,grinding head device,milling head device,chip conveyor device,spray cooling device,boring internal hole device,digital display device and simple CNC tool post,etc. |