LC(LCK)250-LC(LCK)600
发布时间:2024/01/03
一。产品介绍
本机床适用于高速钢和硬质合金刀具对不同材质的盘类、轴类和筒形零件进行外圆、端面、切槽和内外锥体、卷筒全长螺旋槽的车削加工。
This machine is applicable for turning the excircle,end surface,circular groove,inner bore, internal and external cones as well as drum spiral groove on overall length of axle,cylindrical and disc parts with different materials with the help of high speed steel or hard alloy cutters.
注:(1) 本公司保留修改技术参数的权利。
样本如与技术协议有出入,以技术协议为准。
二。技术参数
型号 参数 | Model Para meters | LC250×L /20 | LC400×L/18 | LC400×L/30 | LC600×L/150 | LCX250/1×L/20 | LCK315×L/32 |
最大回转直径 (mm) 地坑中 基座平板上 | Max.swing iameter(mm) Inside pit On base floor | - φ2500 | - φ4000 | φ4000 φ2500 | φ2500 φ6000 | - φ2500 | - φ3150 |
最大工件长度L (mm) | Max.workpiece length L(mm) | 4000~20000 | |||||
最大工件重量 (t) | Max.workpiece weight(t) | 20 | 18 | 30 | 150 | 20 | 32 |
主轴锥孔尺寸 (mm) | Dimension of spindle taper hole(mm) | φ120 1:7 | φ120 1:7 | φ140 1:7 | φ285.775 1:4 | φ120 1:7 | φ140 1:7 |
花盘最大扭矩 (kN·m) | Max.faceplate torque(kN·m) | 30 | 36 | 30 | 125 | 36 | 80 |
单刀架切削力 (kN) | Cutting force of single tool post(kN) | 30 | 50 | 30 | 63 | 50 | 90 |
花盘直径(mm) | Faceplate diameter(mm) | φ2000 | φ1250 | φ3150 | φ2500 | φ2500 | φ3150 |
主轴转速级数及 范围 级数 范围(r/min) | Steps and range ofspindle rotational Speed Range(r/min) | 直流无级 DC stepless 1~100 | 直流无级 DC stepless 0.3~30 | 直流无级 DC stepless 0.63~63 | 直流无级 DC stepless 0.5~50 | 直流无级 DC stepless 1~100 | 直流无级 DC stepless 0.3~60 |
刀架进给 (mm/min) 纵向 横向 | Tool post feed range (mm/min) Longitudinal Transverse | 9~70 9~70 | 0.265~40 0.1325~20 | 0.1~46 0.1~46 | 0.1~500 0.1~500 | 0.265~40 0.1325~20 | 1~600 1~400 |
刀架快速移动 (mm/min) 纵向 横向 | Tool post fast movement (mm/min) Longitudinal Transverse | 4500 3500 | 3000 1500 | 1000 1000 | 3000 1500 | 3000 1500 | 6000 4000 |
刀架行程 (mm) 纵向 横向 | Tool post travel (mm) Longitudinal Transverse | 600 500 | L 820 | L 560 | 3000 850 | L 1250 | 100 100 |
主电机功率 (kw) | Power of main motor(kW) | 55 | 55 | 75 | 144 | 55 | 75 |
注:以上数据均为标准参数,也可根据用户要求,配置不同的数控系统及特殊功能部件。 如:砂带磨装置、排屑器装置、冷却装置、磨头装置、动力钻铣头等。 Note:the above data are for standard parameters,the different CNC system and special functional components shall be equipped according to the user requirements.For example,abrasive belt grinding device,chip conveyor device,cooling device,grinding head device and power drilling-milling head,etc. | |||||||